Home > News > Content
Products Categories
Contact Us
Zhenjiang Sinowa Polyurethane Equipment Co.,Ltd
Tel : +86-511-85527018
Mob : 008613391227282
E-mail: sinowa@sinowa.cn
Address: Wuzhou Road, National High and New Technology Industrial Development Zone, Zhenjiang City, Jiangsu Province
Production Process Of Foaming Machine
Sep 20, 2018

1, feeding, mixing: Through the feeding system will be quantitative cement, foaming agent, stabilizing foam enhancer added mixer, dry mixed for 30 seconds;

2, stirring: The quantitative warm water into the mixer, wet stirring for 2 minutes; Add the quantitative foaming agent into the mixer for 8-15 seconds;

3, injection mold, foaming: The slurry is injected into the mold foam, foaming process of about 3-5 minutes;

4, the initial maintenance: injection mold After the completion of a number of hours for the initial maintenance;

5, demoulding: To be foamed cement insulation board to complete the initial coagulation, with initial strength can be demoulding;

6, cutting: With a certain intensity of foam cement insulation board blank after stripping can be cut, cutting specifications according to the need to adjust the cutting blades;

7, the finished product maintenance: Foam cement insulation Board maintenance period should be no less than 7 days

Related News

Copyright © Zhenjiang Sinowa Polyurethane Equipment Co., Ltd. All rights reserved.